 | |  | |  | |  | |  |
DAQ SOLUTIONS LTD.
Innovative Evolution
Innovative Evolution
DAQ Solutions Ltd are proud to introduce the Enerdis range of energy meters and power monitors.
Power Monitors
Enerium
management and electrical network quality measurement.
The range
ENERIUM 100/110 : network monitoring and installation sizing
ENERIUM 200/210 : network monitoring and installation sizing + energy management
ENERIUM is available in 2 versions:
ENERIUM 100 and 200: with display
ENERIUM 110 and 210: without display
Performance
Energy: Class 0.5 measurement of the 4 quadrants as per IEC 62053-22
Qualimetry : harmonics up to 50th order, THD, crest factor, power factor
8 load curves to be selected from 12
4 trend curves to be selected among the quantities measured or calculated by the
product
Harmonics display by order and by phase up to the 50th order (25th for ENERIUM 100
and 110.
Display of the electrical quantities as instantaneous, minimum, average, maximum,
average minimum and average maximum values
Up to 8 configurable alarms each with 2 conditions "and" or "or"
Event recording with date, time, duration and the highest value during the event
Communication using optical head, Ethernet or RS485 output
Firmware upgrading with new features via an optical head
Compatible with 400Hz networks (optional)
Version with low-level 19 - 58 Vdc supply available (optional)
6.4 kHz sampling rate
3 customizable screens
The range
ENERIUM 100/110 : network monitoring and installation sizing
ENERIUM 200/210 : network monitoring and installation sizing + energy management
ENERIUM is available in 2 versions:
ENERIUM 100 and 200: with display
ENERIUM 110 and 210: without display
Performance
Energy: Class 0.5 measurement of the 4 quadrants as per IEC 62053-22
Qualimetry : harmonics up to 50th order, THD, crest factor, power factor
8 load curves to be selected from 12
4 trend curves to be selected among the quantities measured or calculated by the
product
Harmonics display by order and by phase up to the 50th order (25th for ENERIUM 100
and 110.
Display of the electrical quantities as instantaneous, minimum, average, maximum,
average minimum and average maximum values
Up to 8 configurable alarms each with 2 conditions "and" or "or"
Event recording with date, time, duration and the highest value during the event
Communication using optical head, Ethernet or RS485 output
Firmware upgrading with new features via an optical head
Compatible with 400Hz networks (optional)
Version with low-level 19 - 58 Vdc supply available (optional)
6.4 kHz sampling rate
3 customizable screens